 |
Scouring Pad Produt Solution
Main machines:
Electronic Weighing Opening system bale opener: Suitable for opening and mixing of two or more fibers for pre-treatment system.
Mixing bale opener:
Open and mix one or multiple fibers and inputs them to the next process.
Pre-opener:
Open and mix of single or multiple specifications of raw materials and inputs them to the next process through a cotton-feeding fan with strong magnets for impurity removal.
Big cabin blender:
Provides full mixing and storage for fibers after various initial openings to facilitate continuous production.
Vibrating feeding hopper:
Forms a uniform cotton layer from the mixed fibers and continuously sends them to the next process.
Carding Machine:
Suitable for carding fibers into a mesh.
Cross lapper:
Lays the mesh uniformly and folds it crosswise to the desired width and thickness, then sends it to the next process.
Feeding apparatus:
Feeds the laid cotton mesh of different thicknesses uniformly into the pre-needling area.
Calender:
Suitable for surface treatment of non-woven fabrics to achieve the required surface finish and thickness.
Middle Speed Needle loom:
Pre-strengthens the fluffy and weak cotton mesh output by the carding machine.
High Speed Needle loom:
The needle board drives the needle up and down at high frequency, and the hook on the needle drives the fibers to intertwine with each other, forming a dense non-woven fabric.
Oven:
Suitable for post-finishing processing, drying, and heat-setting of non-woven fabrics.
Cutting and Winding Machine:
Cuts and winds non-woven fabrics, measures and codes them, then winds them into rolls.
 |  |
 |  |
 |  |  |
 | ||
Scouring Pad Produt Solution
Main machines:
Electronic Weighing Opening system bale opener: Suitable for opening and mixing of two or more fibers for pre-treatment system.
Mixing bale opener:
Open and mix one or multiple fibers and inputs them to the next process.
Pre-opener:
Open and mix of single or multiple specifications of raw materials and inputs them to the next process through a cotton-feeding fan with strong magnets for impurity removal.
Big cabin blender:
Provides full mixing and storage for fibers after various initial openings to facilitate continuous production.
Vibrating feeding hopper:
Forms a uniform cotton layer from the mixed fibers and continuously sends them to the next process.
Carding Machine:
Suitable for carding fibers into a mesh.
Cross lapper:
Lays the mesh uniformly and folds it crosswise to the desired width and thickness, then sends it to the next process.
Feeding apparatus:
Feeds the laid cotton mesh of different thicknesses uniformly into the pre-needling area.
Calender:
Suitable for surface treatment of non-woven fabrics to achieve the required surface finish and thickness.
Middle Speed Needle loom:
Pre-strengthens the fluffy and weak cotton mesh output by the carding machine.
High Speed Needle loom:
The needle board drives the needle up and down at high frequency, and the hook on the needle drives the fibers to intertwine with each other, forming a dense non-woven fabric.
Oven:
Suitable for post-finishing processing, drying, and heat-setting of non-woven fabrics.
Cutting and Winding Machine:
Cuts and winds non-woven fabrics, measures and codes them, then winds them into rolls.
| |
| |
| | |
| ||
